Description
Technical Specification of LIGHTIFE Solar Street Light
Features :
- Zero Electricity Cost. Solar energy saved up to 50%. high brightness, even in lighting output with automated radar control system.
- 2-years lifetime.
- Instant start, no flickering, no humming.
- Special circuit design, each group of LEDs work separately, avoiding any problem of lighting output caused or influenced by single faulty LED.
- Green environmental protection, no electricity or wires required.
- No RF interference
Applications: Outdoor, Street / Park / Lane / Factory / Housing Society / Industry outdoor etc.
MAIN SPECIFICATIONS
No. | ITEM | LTSSL20 |
1 | LED Power | 20W |
2 | Total Power | 20W |
3 | Real Output | 4W |
4 | Luminous Flux | 500Lm |
5 | LED Qty | 48PCS |
6 | Color Temperature | 6000-6500K Cool White |
7 | Control System | Sensor |
8 | Charge time | 4-6 Hours |
9 | Discharge time | 10-12 Hours |
10 | Lifetime | >10,000 Hours |
11 | Working Temperature | -10℃ to + 40℃ |
12 | Storage Temperature | -10℃ to + 60℃ |
13 | Humidity Operating | 10-80% |
14 | Humidity Storage | 10-80% |
15 | Weight | 1.1 KG |
16 | Size | 38*19*5.5cm |
17 | IK Code | IK01 |
18 | IP Code | IP65 |
19 | Luminaires Class | Class II |
20 | Fixing Ways | On 4M pole |
Safety Notice for Using:
- Before starting use of the light ,please check if the light was damaged during transportation.if any damage shown,please DO not install or use it.
- Any maintenance should be performed by trained professionals only.
- Never allow the light to come into contact with open flames or external heat sources.
Maintenance:
Prior to cleaning the light, make sure it has been disconnected form the power supply.
Use a dry or slightly moistened cloth for cleaning.
Never use any chemicals or abrasives for cleaning.
Installation:
This product should be installed by trained electricians.