Description
Technical Specifications of LIGHTIFE Solar Street Light
Features :
- Zero Electricity Cost. Long Backup. High brightness, even in lighting output with an automated sensor control system.
- Instant start, no flickering, no humming.
- In special circuit design, each group of LEDs works separately, avoiding any problem of lighting output caused or influenced by a single faulty LED.
- Green environmental protection, no electricity or wires required.
Applications: Outdoor, Street / Park / Lane / Factory / Housing Society / Industry outdoor etc.
MAIN SPECIFICATIONS
| No. | ITEM | Specification |
| 1 | LED Power | 20W |
| 2 | Solar Panel | 85 Watt Solar Panel |
| 3 | Battery | 6V/45AH Lithium iron phosphate battery |
| 4 | Luminous Flux | 100lm/watt – 130lm/watt |
| 5 | CRI | Ra>70 |
| 6 | Color Temperature | 6000-6500K Cool White |
| 7 | Control System | Daylight Photo Sensor |
| 8 | Charge Source | Solar Panel |
| 9 | Discharge time / Backup Time | 12-15 Hours |
| 10 | Lifetime | ＞50,000 Hours (Customizable Based on Requirement) |
| 11 | Fixing Ways | On 20 feet pole |
Customization:
- Additional Solar Panel Can be attached as per customer requirement.
- Battery Capacity can be increased as per customer requirements.
Safety Notice for Using:
- Before starting the use of the light, please check if the light was damaged during transportation. if any damage was shown, please DO not install or use it.
- Any maintenance should be performed by trained professionals only.
- Never allow the light to come into contact with open flames or external heat sources.
Maintenance:
Prior to cleaning the light, make sure it has been disconnected from the power supply.
Use a dry or slightly moistened cloth for cleaning.
Never use any chemicals or abrasives for cleaning.
Installation:
This product should be installed by trained electricians.
